DIO-3216B數位輸出入控制卡

Applications

Accept : P.B. / M.S. / EMG. / Contact - Start / Stop / Limit switch / sensor

 As I/O of S/W PLC Controller

Industrial ON/OFF control

Features

16 isolated DI and 16  isolated DO channels

 High voltage isolation on all isolated channel(2500Vac)

Software debounce : No debounce, 100Hz, 200Hz, 1KHz

No output transition during start-up

Output status readback

External triggered interrupt(on IN00 ~ IN07)

Keep output state after hot reset(jumper selectable)

Software key function

Specifications (With Matched Wiring Board)

Main Card -- Digital Input

 Input : 16 photo-isolated

 Software debounce : No debounce, 100Hz, 200Hz, 1KHz

ON state : 2.8Vdc(max) 4.5mA(min)

OFF state : 8Vdc(min) 3mA(max)

Switching speed : 10KHz max.(limit by photo coupler speed and debounce filter) 

Interrupt at IN00 ~ IN07

Main Card -- Digital Output

Output : 16 photo-isolated

Output rating : 3A @250Vac, 30Vdc(Relay)

Output range : Open collector  0 ~ 45 Vdc(on card)

                             1A @24Vdc(PMOS)

Sink current : 500mA(peak) per channel(on card)

                             2A @240Vac(SSR)

Switching speed : 20KHz(max)(MOS out only)

Main Card -- General

Card ID : 4-bit

Operation temperature : 0 to +70 degree C

Insulation resistance : 100M Ohm(min) at 1000Vdc

Storage temperature : -20 to +80 degree C

Isolation voltage : 2500Vac 1Min

Operation humidity : 5~95% RH, non-condensing

Connecto r : Two 20-pin male flat cable connectors

Dimensions  : 130(W)*102(H) mm, 5.12(W)*4.02(H) in

DIN rail mounted wiring board

Power Requiremant : 24Vdc ± 4Vdc

Input : 8 with LED indicator

Output : ADP-9201DIN(R) : 8 Relay(3A @250Vac, 3A @30Vdc) with LED indicator

                   ADP-9201DIN(S) : 8 SSR(2A @240Vac) with LED indicator

                   ADP-9201DIN(P) : 8 PMOS(Source 1A @24Vdc) with LED Indicator